Specifications |
Internal Resolution | 1,000,000 counts at 3mV/V |
Display Resolution | Selectable (1/10,000 NTEP approved) |
Input Sensitivity | 1uV/graduation minimum |
Display Increments | Selectable x1, x2, x5, x10, x20, x50, x100 |
Decimal Point Location | Selectable 0 ~ 4 |
Display | 7 Digits 7-Segment LED display, 14.2mm (0.56”) high, with annunciators (7 LED lamps) for function select, Stable, Center Zero, Net, Print, kg, lb, andLow Battery display |
Keyboard | 18 button (VC-202) or 6 button (VC-201) keypad with tactile keys(includes 1 button for Power On/Off) |
Audio Alarm | Tone for key entry confirmation and low battery alarm |
A/D Conversion Rate | 7.5 updates per second |
Load Cell Excitation Voltage | 9.8VDC or 5VDC selectable. Drive up to four 350 ohm load cells |
Analog Input Range | 0.2mV/V to 3.0 mV/V maximum |
Non-Linearity | 0.01% of full scale or less |
Over Capacity | Display “CAP OL” when exceeds the full Scale Capacity |
Tare | Full capacity, push button tare, numeric key tare. Register and Recall 10 Pre-defined Tare valves |
Auto Zero Tracking | Selectable to 3.0 d by 0.5 d step |
Motion Window | Key-in data 0..255 (1 = 0.5 d) |
Calibration Method | Software – Menu driven prompting |
Units of Measure | Selectable kg/lb/g/oz, up to 2 units displayable |
RFI/EMI Protection | All signal and excitation lines filtered to –65db min. @ 500MHz |
Filtering | Selectable digital filter |
RS232C data output | COM Port 1. Full Duplex or Bi-directional COM Port 2. Simplex or Unidirectional (output only) Selectable baud rates (1200,2400,4800,9600,19200), manual or auto print, continuous data out or bi-directional communication |
Remote Display | Programmable as Main Indicator and Remote Display |
Custom Print Format | Programmable, up to 119 characters for Custom Print Format and up to 23 characters for Continuous Print Format |
Set Points | Selectable up to 2 Set Points for Low and High limit settings |
Power | 100/115VAC or 220/230VAC, 50-60Hz, 6VA with built-in Charger for 12 VDC 2-2.3AH Rechargeable Sealed Lead Acid Battery(Battery Dimension 67 (H) x 178 (W) x 34 (D) mm, is optional) |
Current Consumption | 100mA + 30mA per 350 ohm load cell |
Operating Temperature | -10 degrees C to + 40 degrees C |
Relative Humidity | Maximum 90% RH, Non-condensing |
Dimensions | 150 (6”)H x 230 (9.1”)W x 100 (4”)D mm – VC-202 140 (5.5”)H x 230 (9.1”)W x 90 (3.5”)D mm – VC-203 |
Shipping weight | 1.2kg (2.3kg with optional battery) – VC-202 2.1kg (3.2kg with optional battery) – VC-203 |
Enclosure | VC-202 ABS Plastic Casing, VC-203 Stainless Steel Casing |
Warranty | One Year Limited Warranty |